AL7 Vehicle / Motorcycle Telematics

AL7AL7 is an economical fleet tracking unit realizing real-time track and trace with easy installation.

Featuring IP67 waterproof casing, internal antenna, I/O connectivity, driving

behavior event management, and user-defined reports, AL7 is an ideal solution for Motorcycle Tracking, Fleet Management, Car Rental, and Small & Medium-Sized Enterprises.

AL7 GPS Tracker – Product Features:

  • Flexible wireless network options
  • 3-wire easy installation
  • Ultra low current consumption in deep sleep mode
  • Data communication by SMS/TCP/UDP
  • High GPS sensitivity
  • Built-in G-sensor for motion detection
  • FOTA firmware upgrade using FTP
  • Configurable Real Time Tracking & Logging
  • 32 user defined geofences
  • *Roaming preference settings
  • Harsh driving behavior events
  • Configurable power management
  • Over speeding detection
  • Intelligent event control engine
  • Buffered event message of 18,000 positions (equals to 140-day logging data with interval of 1minute)

Optional Features:                                                    

Backup battery for Tampering Alert application

Optional Accessories:

  • 12V / 24V relay for immobilization
  • Panic button
  • iButton reader / tag

AL7 Series Hardware Specification:

Model Number AL7(2G) AL7(UA) AL7(UE) AL7(UG) AL7(CV) AL7(CS)
Dimensions (L x W x H) 88 x 65 x 25 mm
Weight TBD
Housing Flame Retardant ABS (UL 94 V-0), IP67 Water Proof
Operating Temperature -20? ~ +70?
Electrical Characteristics
Power Supply 8V ~ 30V DC (±20%)
Current Consumption Operating : Max.70mA@12V, Deep Sleep Mode : 150uA@12V
Cellular Network Communication


850/1900 900/2100 800/850
Carrier Support WorldWide USA/Canada EU/APAC WorldWide Verizon Sprint
GSM/GPRS Quad-band 850/1900 900/1800 Quad-band N/A
Cellular Antenna Internal Cellular antenna
SIM Card 1.8V/3V Mini SIM(2FF) N/A
Receiver 56 Channels, -161dBm Tracking sensitivity
Accuracy 2.5m CEP
Data Acquisition Rate 1Hz
GPS Antenna Internal GPS antenna
GPS Data Buffer 2 MB
3-Axis Z,X,Y
Resolution/Sample Rate ±16g, 400Hz
Device I/O port
ACC Input 1 Positive
Digital Input* 1 Positive and 1 Negative triggered
Digital Output* 2 Open-collect output
1-Wire Interface Support up to 1 Dallas-Key (iButton) and 2 temperature sensors
USB 1 micro USB inside the case for device configuration
Standard Accessories
USB cable USB cable (Length 1.2m)
Optional Accessories
Backup Battery Internal 3.7V 1000mAh Rechargeable Lithium Polymer Battery

*Specifications are subject to change without prior notice

 *Support up to 2 digital inputs or 2 digital outputs via configuration